WaveArts Tube Saturator 2 v2.11 VST WiN R2R, windows wavearts vst plugins, Win, WaveArts, VST, Tube Saturator, Tube, Saturator, R2R

Tube Saturator 2 v2.11 VST WiN

Team R2R | June 17 2017 | 102 MB

Tube Saturator 2 is a super accurate circuit simulation of a tube pre-amp with analog EQ, which can be overdriven gently for warming effects, or cranked for fat distortion. Like its predecessor, Tube Saturator, TS-2 is based on circuit simulation techology to capture every nuance of an analog circuit. The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power, TS-2 is now super efficient. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

In addition to this breakthrough improvement in speed, TS-2 has many new features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampler algorithm. Use 2x mode to attenuate aliased distortion harmonics. Also new is a mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous new interface.

For more information via video demos, see the video introduction to Tube Saturator 2, and also see examples of applying Tube Saturator 2 to different sounds.

Tech Specs:

  • Accurate tube preamp simulator using 64-bit circuit simulation technology
  • Two common cathode 12AX7 preamp stages
  • Baxandall 3-band EQ
  • Drive control for distortion adjustment
  • EQ bypass
  • FAT mode for increased punch
  • Analog style metering
  • No latency
  • Up to 192 kHz sampling rate, depending on CPU speed.
  • Mono or stereo

What New : http://redi.se/3hf5
INFO/DEMO: http://redi.se/3amv
WaveArts Tube Saturator 20v2.11 VST WiN-R2R
http://beelink.in/3227/WaveArts-Tube-Saturator-2-v2.11-VST-WiN-R2R.html

StompDelay v1.0.1 VST RTAS AAX WiN R2R, windows vst plugins plugins rtas aax plugins, Win, VST, StompDelay, Stomp, RTAS, Delay, AAX

StompDelay v.1.0.1 WiN

Team R2R | June 17 2017 | 7.4 MB

StompDelay is a creative delay plug-in (VST, AAX and RTAS for Windows; AudioUnit, VST, AAX and RTAS for Mac OSX) designed to provide a wide range of sounds from lush analog tape delays through vibrant loops, from classic ping-pong to scratchy pitch shifts. It features both traditional delay effects and a looper when in “infinite operation mode” (called Infinity mode) that offers continuous tap tempo, as well as accurate tape simulation, including simulating the volume drop that occurs when fast forwarding or cueing the tape.

INFO/DEMO: http://redi.se/3ce0
StompDelay v1.0.1 VST RTAS AAX WiN-R2R
http://beelink.in/32882/StompDelay-v1.0.1-VST-RTAS-AAX-WiN-R2R.html

Relayer v1.5.0 VST WiN R2R, windows vst plugins, Win, VST, Tap!, Relayer, R2R, Multi Tap, MULTI, Effect, delay effect, Delay

Relayer v1.5.0 VST WiN

Team R2R | June 17 2017 | 38 MB

Multi-Tap Delay Effect

Designed from the ground-up to provide an efficient and inspiring workflow, Relayer lets you dial in everything from basic delays to radical rhythmic multi-effects with speed, precision and natural musicality.

Feature Highlights:
» Variable multi-tap delay (up to 32 lines) with extensive shaping controls.
» Per-tap modulation editors for Time, Gain, Pan, and 2 Multi-Effects.
» Visualizer helps you understand important settings at-a-glance.
» Intuitive interface for lightning-fast workflow.
» Input Gate for expressive playability.

Relayer is compatible with current versions of all major DAWs on both Mac and Windows platforms (VST, AU and AAX). A single license includes 3 activations that can be used on any combination of individual computer systems or iLok keys.

Changues: https://paste2.org/0D7D76X0
INFO/DEMO: http://redi.se/3bym
Relayer v1.5.0 VST WiN-R2R
http://beelink.in/26030/Relayer-v1.5.0-VST-WiN-R2R.html

Pure Analyzer Essential v1.10.4 WiN UNLOCKED R2R, x86 x64 windows vst plugins flux aax plugins, Win, VST, Unlocked, R2R, Pure, Flux, Essential, Analyzer, AAX

Pure Analyzer Essential v1.10.4 WiN

Team R2R | June 17 2017 | 65 MB

PLATFORM : WiN32/64 – VST/AAX(MODiFiED)

The Flux:: Pure Analyzer System is a network-driven modular RTA-system providing an extensive range of analyzer options for any imaginable audio analysis and measurement applications
For maximum flexibility and efficiency, Pure Analyzer presents the option to separate the signal acquisition from the analysis utilizing a Sample grabber plug-in, and in addition to the Sample grabber plug-in, Pure Analyzer also provide I/O support for ASIO and Core Audio.

Sample Grabber
Sample grabber is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that acquires the source and response signals and sends the signal through the network using the ZeroConf/Apple Bonjour protocol.

You can insert as many instances of Sample grabber plug-ins as required, on the same DAW, different DAWs, and even different computers altogether, and the Sample grabber also support surround configurations. The network configuration setup for the Pure Analyzer System is entirely automatic and transparent to the user.

The audio transport requires approximately 1.4Mbps for each channel at a sample rate of 44.1kHz, so a properly configured standard Ethernet 100Mbps network should be more than sufficient to handle most cases. A 5.1 configuration at 96kHz demands a little less than 20Mbps. Naturally these requirements do not apply when using both Sample grabber and analyzer on the same hardware.

Pure Analyzer Essential
The foundation of the Pure Analyzer System is a standalone application, Pure Analyzer Essential, which can be extended with modules for Live, Metering/Loudness and Surround analysis, performing the graphic analysis rendering using a GPU-efficient 2D/3D graphic engine. The engine is based on the OpenGL standard optimizing the audio-to-visual experience utilizing the GPU on the built in graphics card.

The Pure Analyzer Essential application receives the sample feeds from the Sample grabber and analyzes them in real time. The Pure Analyzer provides the option to receive data from several different Sample grabber plug-ins on the network, and analyze the received data in parallel by selecting the actual corresponding Sample grabber to be the current source for the analysis with a simple button click. In addition to this, the input streams from the physical ASIO/Core Audio I/O can also be selected as the current source for the analysis in the same simplistic fashion.

Add-on Modules
As a complement to the Pure Analyzer Essential, three different add-on modules, all providing specific tools for their actual field of usage, are currently available. In order to use any of the add-on modules, the Pure Analyzer Essential is required.

Available add-on modules are:
– Pure Analyzer Metering
– Pure Analyzer Live
– Pure Analyzer Multichannel

INFO/DEMO: http://redi.se/3cbu
Pure Analyzer Essential v1.10.4 WiN UNLOCKED-R2R
http://beelink.in/26387/Pure-Analyzer-Essential-v1.10.4-WiN-UNLOCKED-R2R.html

TC Electronic VSS3 Native v1.0.5 WiN R2R, x86 x64 windows vst3 plugins vst plugins tc electronic vst plugins aax plugins, Win, VSS3, TC Electronic, Stereo Reverb, Stereo, Reverb, R2R, Native

VSS3 Native v1.0.5 WiN

Team R2R | June 17 2017 | 8.7 MB

PLATFORM : WiN32/64 – VST/VST3/AAX(MODiFiED)

VSS3 is the most professional tool of its kind, the Stereo Source Reverb behind tens of thousands of films, TV shows, albums and unforgettable tracks.

The Sound You Want
VSS3 Native is the most realistic and versatile reverb ever made for your DAW. With a wealth of possibilities to adjust, it will deliver the precise sound you need. Choose a preset for quick and no-fuss reverb delight – or move in depth to take full control of the early reflections, body and tail of your reverb. We call it “crazy tweak-ability”.

VSS3 Native – Main Features:
– Stereo source reverb – ported from the System 6000 hardware series
– Maximum ambience, yet full mono compatibility
– Exceptionally wide dynamic range
– Available as a plug-in for all major DAWs
– Source specific early reflections for character and localization
– Focus Fields for easy tweaking and navigation
– Based on 1000s of hours of fine-tuning and trimming
– Great results – with or without modulation
– Seamlessly import VSS3 presets from System 6000

Changelog:
* Resize: the plug-in now remembers its size
* Resize: magnets at 1 and 1.5 scale points
* Resize: In rare situations, users could end up not being able to resize the plug-in. FIXED
* Modifications with the MAC installer to better handle old PowerCore versions
* Improvements on stability

INFO/DEMO: http://redi.se/3gep
TC Electronic VSS3 Native v1.0.5 WiN-R2R
http://beelink.in/31243/TC-Electronic-VSS3-Native-v1.0.5-WiN-R2R.html

Maximal v2.1.1 AU VST VST3 x86 x64 WiN MAC R2R, x86 x64 windows vst3 plugins vst plugins macos plugins au for mac, x86, x64, Win, VST3, VST, Tube Saturation, Tube, Tape, Saturation, R2R, Oversampling, Maximal, MAC, Limiting, AU

Maximal v2.1.1 WiN MAC

Team R2R | June 17 2017 | WiN: 4.7 MB | OSX: 10.7 MB

AU VST VST3 x86 x64

Maximal is a loudness maximiser, featuring an advanced lookahead peak limiter and analogue modelled saturation. The multi-stage limiter section features next-level lookahead, automatic makeup gain, and adaptive and responsive release. This plugin will smoothly limit any peaks in the audio, and automatically increase the overall level. The analogue modelled tape and tube saturation modes encompass all the best parts of the analogue world, without all the bad parts – such as high-frequency roll-off, hiss, wow and flutter. Using our adaptive release technology, you can simply tell Maximal 2 whether you want the limiter to be fast and loud, or slow and transparent, and it will do what’s needed inside. You can use Maximal 2 to catch rampant peaks in an audio recording, or you can use it to make your track phat and loud – it’s up to you how you push it.

Features:
* Transparent Limiting
Everything from fast peak catching, to making tracks loud, the clean and loud modes can maximise your track without colouration.

* Tape & Tube Saturation
Add some warmth with our analogue modelled saturation – warmth without high-frequency roll-off, hiss, wow or flutter.

* 8x Oversampling
Run Maximal at up to 8x oversampling, to limit aliasing and inter-sample peaks when pushing it hard.

* Cross Platform
Coded from the ground up in optimised C++ for both Mac OSX and Windows. You can even share your presets between different operating systems.

Changes for 2.1.1:
– Fixed Reaper in OS X Sierra becoming sluggish when GUI is open.
– Fixed OS X Sierra not installing presets and manual.
– Fixed plugin delay when bypassed.
– Fixed parameters sometimes stop responding when oversampling changed.
– Fixed some parameter names showing commas.
– Improved GUI rendering speed.
– Improved oversampling speed.

INFO/DEMO: http://redi.se/3f69
Maximal v2.1.1 AU VST VST3 x86 x64 WiN MAC-R2R
http://beelink.in/29261/Maximal-v2.1.1-WiN-MAC-R2R.html

Eekjuliza v2.0 WiN MAC R2R, windows vst3 plugins vst plugins plugins au for mac aax plugins, Win, VST3, VST, R2R, MAC, Eekjuliza, AU, AAX

Eekjuliza v2.0 WiN MAC

Team R2R | June 17 2017 | WiN: 8 MB | OSX: 26 MB

VST, AAX, VST3, AU

Eekjuliza is designed to be the last plugin in your chain. Monitor your tracks, give them some life, add some dynamic equalization and of course mix them in accordance to other tracks. Great care has been taken to ensure that Eekjuliza has all features you might need. Eekjuliza also emphasizes on visual aid while mixing.Of course, your Ears should be the final judge on where your sound should be, but your eyes can be an invaluable aid when it comes to determining where your sound is at Eekjulizer gives you access to all your tracks from within one unified interface. Compare mix settings, visualize spectral overlap, manage your mix in groups. Want to know how you saturation affects the mix? Bypass it, compare it. Make snapshots of your whole mix and restore them instantly.

INFO/DEMO: http://redi.se/3hf4
Eekjuliza v2.0 WiN MAC-R2R
http://beelink.in/32881/Eekjuliza-v2.0-WiN-MAC-R2R.html

U73b Compressor v2.0.1 WiN R2R, x86 x64 windows vst3 plugins vst plugins aax plugins, Win, VST3, VST, U73b, R2R, Limiter, Compressor, AAX

U73b Compressor v2.0.1 WiN

Team R2R | June 17 2017 | 15 MB

WiN32/64 – VST/VST3/AAX(MODiFiED)

Faithful and unique emulation of an old German broadcast compressor/limiter unit U73b. Second generation of the famous plug-in…

New in version 2:
– External side-chain added
– Auto Output parameter added
– Plugins built in newer IDEs with more effective code.
– Color settings dialog added
– Default calibration parameter value mechanism added, calibration parameter range changed.
– English language added
– Oversampling added
– GUI improved, retina support

The new version (2.0.1) of the plug-in reports the latency caused by activated oversampling. We have also improved AudioUnit compatibility with older Carbon hosts and fixed a few minor bugs.

INFO/DEMO: http://redi.se/3fke
U73b Compressor v2.0.1 WiN-R2R
http://beelink.in/29967/U73b-Compressor-v2.0.1-WiN-R2R.html

Chord Player v1.0.0.2 WiN MAC R2R, x86 x64 windows vst3 plugins vst plugins plugins au for mac, x86, x64, Win, VST3, VST, R2R, Player, MAC, Chord Player, Chord, AU

Chord Player v1.0.0.2 WiN MAC

Team R2R | 14 Jun 2017 | OSX: 3.4 MB | WiN: 4.1 MB

WiN32/64 – VST/VST3 / MacOSX – AU/VST

Chord Player is a MIDI processor plug-in that helps you play chords and chord progressions in an easy way. Set up to 24 chords at a time, use fretting keys to choose one, and play it by picking keys. you can hit the chord, strum it or play its individual notes using different picking keys. Chords on keyboard and guitar are voiced a bit differently due to the string tuning and their orders. Chord Player includes different chord voicing modes including keyboard and guitar modes. If the key of the song changes you can use the transpose buttons to move all the chords up or down. You can also bypass the process if you need to play the target instrument in a normal way.

Features:
• A long list of common chords to choose from (maj, min, sus, etc.).
• All chords come with different voicing (Basic, 1st & 2nd inversions and guitar modes).
• 24 fretting keys to set and choose chords.
• 24 picking keys to set and play chords.
• Hit the chords with only one key or play their notes separately.
• Transpose all the chords up or down at once.
• Customizable mapping for fretting and picking keys.

INFO/DEMO: http://redi.se/3hbm
Chord Player v1.0.0.2 WiN MAC-R2R
http://beelink.in/32673/Chord-Player-v1.0.0.2-WiN-MAC-R2R.html

Scale Player v1.0.2.2 WiN MAC R2R, x86 plugins vsti x86 x64 plugins vsti x64 windows vsti vst3 plugins vst plugins macos plugins au for mac, Win, Scale, R2R, Player, MAC

Scale Player v1.0.2.2 WiN MAC

Team R2R | 14 Jun 2017 | OSX: 4.4 MB | WiN: 3.5 MB

WiN32/64 – VST/VST3 | MacOSX – AU/VST/VST3

Scale Player is a MIDI effect plug-in that allows you to play different scales in any key and mode using the idea of relative notes rather that static note values. The plug-in calculates the intervals between pitches based on the selected scale and the user can move up and down the scale playing melodies, arpeggios or even chords using a few keys.

The result is an unusual way of playing instruments, which can be fun, inspirational and much easier to play since you don’t have to worry about hitting the wrong note, memorizing all the scales in all the keys and practicing complex riffs and phrases that can be a challenge to play the usual way.

Scale player is a new kind of instrument that like any other instrument may take a bit of time to learn and master, but it will be a rewarding experience. It’s ideal for live playing and with some practice you can play complicated licks and phrases that would impress everyone.

How does it work?
Scale player acts as an VST instrument plug-in that takes the input MIDI data and swaps it with the processed one. The output can be routed to any other instrument in the host application. The AU version works as a MIDI processor effect in hosts like Logic Pro x that support the type.

There are 16 keys with offsets assigned to them that are used to move up and down the scale and play different notes relative to the last note that has been played.

For example ‘+1’ moves one note up the scale and plays it and ‘Home’ resets and plays the root note for that scale. Home can be changed to one of the notes on that scale (1st, 2nd, etc) using Home Note menu. The repeat key plays the last note.

In addition to playing keys there are control keys such as Scale -/+, Octave -/+, Key -/+, Home Note -/+, Key Selectors, Home Selectors, Scale Selectors and Octave Selectors that can be used to control settings with MIDI keyboard.

INFO/DEMO: http://redi.se/3h5k
Scale Player v1.0.2.2 WiN MAC-R2R
http://beelink.in/32348/Scale-Player-v1.0.2.2-WiN-MAC-R2R.html

Poll

Please, rate your DAW

Other polls...